MIL-STD-130 Commercial Hardware

Mark per mil-std-130 method rubber stamp or silk screen height 0.06 in. Color black

Aluminum,5083-0,spec qq-a-250/6 .190 thk; plate 12317049-1; angle- 12317049-2; for casting option: unlessotherwise specified fillet radii 0.25,edge radii .09,wall thickness .19; apply ident marking per mil-std-130

Identification per mil-std-130

Identication per mil-std-130

Consists of 1ea plate,cage 19207,p/n 12302122-6;1ea channel,cage 19207,12302307;1ea gusset,cage 19207,p/n 12302305-1;1ea gusset,cage 19207,p/n 12302305-2;1ea plate,cage 19207,p/n 12302304;apply per mil-std-130,19207 p/n 12302301;weld in accordance with mil-std-1261,class 2

18.000 lg,0.880 w,material per mil-std-130

One side has two holes along length 2.0 in. Apart 1.29 in. From end; includes 5 captive screws and 1 pad; marking gn acess printed circuit board 0.18 in high per mil-std-130 using ink black per mil-1-43553

Head is flat 0.721 diameter 0.0938 thick and 0.585 diameter by0.045 step,head has 6-0.073 holes thru equally spaced on 0.430 diameter bolt circle and 15 degree angle to center-line;identify per mil-std-130

Head is flat 0.721 diameter 0.0938 thick and 0.585 diameter by0.045 step,head has 6-0.073 holes thru equally spaced on 0.430 diameter bolt circle and 15 degree angle to center-line;identify per mil-std-130

Head is flat 0.721 diameter 0.0938 thick and 0.585 diameter by0.045 step,head has 6-0.073 holes thru equally spaced on 0.430 diameter bolt circle and 15 degree angle to center-line;identify per mil-std-130

C/o nut (2),pn nas697c04m;bracket,pn 11697594;rivet (4),pn ms20426ad2-2,0.067 in.Dia;apply part number per mil-std-130

Head is flat 0.721 diameter 0.0938 thick and 0.585 diameter by0.045 step,head has 6-0.073 holes thru equally spaced on 0.430 diameter bolt circle and 15 degree angle to center-line;identify per mil-std-130

6 holes .154 dia,rubber stamp p/n.13 high with white ink tt-i-558 mil-std-130 applies

96906-mil-std-130 government standard

Material:steel;6.975 in.Lg; 2.120 in.W;2 holes 0.875 in.Dia; surface finish:method a1.1 or a1.2 plus b2.1 per dwg 9347218;part number applied per mil-std-130