MIL-STD-130 Spec. Parts

Mil-std-130 fed std single material response

Mil-std-130 fed std single material response

Mark with metal stamp the cage and part number in 2.5 to 3.5 in high characters iaw mil-std-130 at the location shown on the drawing;treat and paint iaw mil-t-704, type f, color iaw fed-std-595, color chip 24533

Mark iaw mil-std-130 with cage 56161 and p/n 10674353-001

Metal stamp id 56161-10551524 iaw mil-std-130 at height of 2.5-3.5mm;treat and paint iaw mil-t-704 type f;color to be iaw fed std 595 color chip 24533

Mil-std-130 fed std single material response

Apply rubber stap,decal or stencil markings iaw mil-std-130 2-5 character size

Material stainless steel;identify w/p/n 13160 7575951 and dash number per mil-std-130

Mil-std-130

Mil-std-130 mil std all treatment responses overall

Identify parts per mil-std-130

Material: 0.063 thk al, 6061-t6 qq-a-250/11. Remove burrs and break sharp edges. Identify per mil-std-130. Chemical film per mil-c-5541,class 1a.

Except as shown this item is equivalent to and may be made from ms35825-12 (hinge,butt,continuous (piano) 0.060 thickness, 0.125 pin dia.). Remove burrs and sharp edges. Identify iaw mil-std-130.

Material: 0.125 thk steel, 304, annealed. Remove burrs and break sharp edges. Identify per mil-std-130. Passivate per qq-p-35.

Mil-std-130 government specification