change location
321-802-5889
321-733-7477
Item to be tagged iaw mil-std-130; tag shall be marked "80063 assy a3284295"
Bond per hp16-25,type xv11,class a;identify per mil-std-130;consists of2 flanged round bushings;1 bracket
Head is flat 0.721 diameter 0.0938 thick and 0.585 diameter by0.045 step,head has 6-0.073 holes thru equally spaced on 0.430 diameter bolt circle and 15 degree angle to center-line;identify per mil-std-130
2nd leg has 2 more holes, 0.139-0.144 in dia, centered 0.976 from open end and 6.356 & 7.262 from left edge; 1st leg has 7 semicircular cutouts on bottom edge with radii of 0.500 - see drawing for location and for placement of markings "a1, a2, ..., a8" and "f1, f2, ..., f8" across first leg and "a1, a2, ..., a8" across second leg; marking to be done in .12 high characters using find no. 1 mil-std-130
Mil-std-130 mil spec single treatment response overall single layer
Mil-std-130 mil spec single treatment response overall single layer
Apply ident marking by metal stamp per mil-std-130 with letter height .25/.18
Identify with part number per mil-std-130, marking process per mil-m-13231, group iii; locate marking externally on one side approximately 0.500 inch from bottom/open end and 1.000 inch from right edge
Finish iaw mis-20007 ty i cnd b gr 2a (see dwg) mark iaw mil-std-130 weld iaw mis-19874 heat treat iaw mil-s-6090 dry film lube iaw mil-l-46010
Irregularly shaped - see drawing for details; includes bracket (-011) and cover, rear (-010); rubber stamp or stencil cage and part number (with revision) in black epoxy ink iaw a-a-56032 in 0.80-0.160 inch high characters per mil-std-130
Lirregularly shaped on top and left side - see drawing for details; rubber stamp or stencil cage and part number on underside with black epoxy ink iaw-a-a-56032 in 0.080-0.160 inch high characters per mil-std-130
Mil-std-130 mil std single treatment response overall