Model or part number: 12446263
About this product
This link is made of two pieces: 12446263-1 a link and 12446263-2 a pin that is brazed into the 1st end eye. 12446263-2 (pin) diameters are 0.150" nominal; step up to 0.250" nominal; step up to 0.500" nominal. The link is 4" long with a slot. Slot is 1.72 inches long, 0.252" wide and starts 0.90" from first end of link. Slot has inside radii r .06 max. X 2. Link is 0.250" thick; 2.19 " from the first end there is a 0.07" step down and 3.44" from the first end there is a step up of 0.510". The raised-face second end is tapered the last 0.56" of the link with a 0.152" (nominal) hole chamfered 0.045 " x 45 degrees plus/minus 5 degrees. Height of this face is 0.690 with the hole completely through the link. Link and pin to be quenched and tempered to rhc 32-38; pin brazed iaw mil-b-7883, grade b, type i, brazing increases rhc to 30-50. Next higher assembly: 2520-01-469-8749, p/n 12446586, interface assembly.
Link Assembly NSN 3040-01-482-9081.
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
NSN | Component Description |
---|---|
NSN 5310-01-479-2125 | Flat Washer |
NSN 9510-01-481-7325 | Metal Bar |
NSN 4730-01-481-9049 | Hydraulic System Access Manifold |
NSN 5340-01-482-0229 | Threaded Rod End |
NSN 5340-01-482-0402 | Mounting Plate |
NSN 5340-01-482-1230 | Sealing Plug Assembly |
NSN 5340-01-482-8745 | Sealing Plug Assembly |
NSN 3040-01-482-9081 | Rigid Connecting Link |
NSN 5340-01-485-6380 | Access Cover |
NSN 3120-01-570-7748 | Thrust Washer Bearing |
NSN 5325-01-589-1325 | Retaining Ring |
NSN 5340-01-643-8519 | Sealing Plug Assembly |
An item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) a one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) a one-piece item with both ends processed for terminations, excluding threaded end(s); (3) a two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) a three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; drag link, steering; link, anchor, brake shoe; tie rod, steering; and turnbuckle. For cylindrical shaped externally threaded items without end attachments, see rod, threaded end and stud (as modified).
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Physical protection.
No requirement.
No special type of cargo code applicable.
Metal hardware.
Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
Code | Definition |
---|---|
FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
NS | New Surplus. New material item purchased from excess inventory. |
OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
SV | Serviceable product. |
AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
Part Number | RNVC | RNAAC | DAC | CAGE |
---|---|---|---|---|
12446263 | 2 | ZZ | A | 19207 |
Name | No. Items | |||
---|---|---|---|---|
[You must be logged in to use lists] |