» » » 5310-00-160-9817

5310-00-160-9817

Flat Washer

5310001609817

Request A Quote

Part Number:
Quantity: Condition:
Company Name: Phone:
Full Name: Email:
Company Privacy Policy    

Item Specifics

Federal Supply Class (FSC)
Nuts And Washers
National Item ID Number (NIIN)
001609817
Cross-sectional Shape Style
Rectangular AAGR
Hole Diameter
0.193 inches minimum and 0.213 inches maximum AAUB
Peripheral Shape Style
Round ABMW
Center Hole Shape Style
1 round ABMX
Thickness
0.049 inches ABNM
Overall Diameter
0.433 inches minimum and 0.458 inches maximum ADAV
Color
Black overall HUES
Material
Steel corrosion resisting overall or steel comp 321 overall or steel comp 347 overall or steel comp 348 overall MATT
Material Document And Classification
Mil-s-5059 mil spec 1st material response overall and mil-s-6721 mil spec 2nd material response overall and mil-s-6721 mil spec 3rd material response overall and mil-s-6721 mil spec 4th material response overall MDCL
Surface Treatment
Oxide film overall SFTT
Surface Treatment Document And Classification
Mil-c-13924 mil spec single treatment response overall STDC
Nondefinitive Spec/std Data
A type and 2 grade and a class ZZZT

Item Identification | Nuts And Washers

5310-00-160-9817, A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

Supply Class (FSC)NSN AssignmentNIINItem Name Code (INC)
5310 Aug 19, 1972 001609817 13393 (Washer, Flat)

End Item Applications NSN 5310-00-160-9817 end item applications/platforms

Item Identification Guide

NSN Reference Drawing

Flat Washers Cross Reference

Part Number CAGE Variation
FFW92 Cage Code 81348 Non-Difinitive Specification
NAS1149C0363B Cage Code 80205 Original Part
AN960XC10 Cage Code 88044 Superseded, Discontinued, or Replaced
NAS1149 Cage Code 80205 Original Part

National Motor Freight NMFC: A six position numeric code, which divides articles into groups or classes according to physical characteristics. The classification is based on truckloads vs. less than truckload.

Code Description Code Value Meaning
NMF Description NMFC 194160 Washer Or Gaskets, Iron Or Steel,
Universal Freight Code UFC 55210
Less than a truck load rating LTL U 50.0
Water Commodity WCC 713 Metal hardware
Type of Cargo TCC Z No special type of cargo code applicable
Special Handling SHC 9 Other or no special handling required (sh)
Air Dimension Code ADC A Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity ACC B Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling ASH Array No special handling required.

Trade Control Compliance Schedule B Export Code: A ten position numeric code that identifies an item exported overseas. this unique identification code is assigned by the U.S. Census Bureau.

Schedule B Sch. B Description Demilitarization Classification ITAR Regulation
7318220000 Washers other than lock washers, iron or steel Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9). Unclassified Not ITAR Controlled

MOE / End Users Represents the subdivisions of a US governmental organization or an agency of the North Atlantic Treaty Organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.

Country / Entity Name MOE
ZF France ZF
ZN Netherlands ZN
ZZ Department Of The Army ZZ
DSOR MOE Rule NIMSC
No MOE rules found for this NSN.

Material & Special Handling Item material and handling information

Code Description Value Meaning
HMIRS N Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals Indicator U Precious metal content is unknown
Criticality Code X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Repairability Z This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Management Rec. / Rep. Code: 1i cog not stocked print on demand flat forms

 CTL: T22BXX-

Air Force

Fund SF – Stock fund applicable to items managed for the air force by the respective inventory control point.
Budget 9 – Air force decentrally managed
Material Management SX – Brac mmac for oc-alc
Price Validation V – The current standard price has been validated. - the item has been analyzed in conjunction with the zero overpricing program and is in the accepted price range. -the item was procured under open competition and under the competitive arena the price is considered fair and reasonable. -zop or standard price challenges are permissible but must be supported by adequate justification.

Air Force Management Code Definition

Fund A two position code that classifies an item into categories in terms of funding and budgeting.
Budget Identifies investment items to budget programs from which item is funded.
Material Management Identifies an item of supply to be managed by a specific activity manager.
Price Validation Indicates validity of the recorded unit price.

Marines

Stores Account 1 – Marine corps stock fund account item.
Combat Essentiality 2 – Non-critical repair part. repair parts or major components whose failure in an end item will not render the end item inoperati
Management Echelon B – All commodities
Material Identification
Operational Test
Physical Category 1 – Bin

Marines Code Definition

Stores Account (SAC) Indicates the type of funds employed within the marine corps in supply support operations.
Combat Essentiality (CEC) Establishes if an item is essential to the operational readiness of a weapon system or the conduct of a military mission, or that a functional part contributes to the tactical and essential operations of an item component or assembly, and its failure would render the item inoperable or incapable of fulfilling its mission.
Management Echelon (MEC) Classifies items into categories by material and procurement echelon.
Material Identification (MIC) Identifies method of accounting, degree, and type of control to be maintained for the item and to identify material by specific purpose, type, or classification for the war reserve system.
Operational test (OTC) Indicates special procedures must be performed on an item of supply while under care-in-stores or as a part of the issue process.
Physical Category (PCC) Indicates category for picking, packing, and marking items for shipment.

Navy

Cognizance 9B – Naval inventory control point, mechanicsburg
Special Material
Requisition Restriction
Special Material Content

Navy Management Code Definition

Cognizance (COG) Identifies the inventory manager (IM) and inventory control point (ICP).
Special Material (SMIC) Categorizes material on the basis of requirements for source or quality control, technical design, or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling
Req. Restriction (IRRC) Item requisition instructions.
Special Material (SMCC) Indicated that an item represents or contains peculiar material requiring special treatment, precautions, or management.

Army

Accounting Requirements X – Expendable item. an item of army property coded with an arc of ``x'' in the amdf. expendable items require no formal accountability after issue from a stock record account. commercial and fabricated items similar to items coded ``x'' in the amdf are considered expendable items.
Material Category 1 T – Industrial supplies (dla/gsa items)
Material Category 2 2 – Stock fund secondary items
Material Category 3 2 – Nonreparable items (exclusive of insurance and provisioning items). this code will be used to identify items which are not reparable.
Material Category 4 & 5 BX – Oh-58d army helicopter improvement program (ahip)

Army Management Code Definition

Accounting Requirements Accounting Requirements Code (ARC): a one position alpha code that indicates the accountability of an item of supply.
Material Category 1 Material category and inventory manager.
Material Category 2 Appropriation and budget activity account.
Material Category 3 Management inventory segment.
Material Category 4 & 5 Specific group / generic category.